FilmCraft guide

Premiere Pro to FilmCraft: open a .prproj project in FilmCraft

FilmCraft, the open-source video editor, does not open Premiere Pro .prproj files. PR2XML reads your .prproj without Premiere and writes a native FilmCraft project (.fcproj) that FilmCraft opens directly: every sequence you choose in its bin, the media in theirs, and titles as editable text layers. It can also write one FCP 7 XML, which FilmCraft imports.

Read: 5 min

Can FilmCraft open Premiere projects?

Not a .prproj file. As of November 2026, FilmCraft's README lists native .prproj import among its gaps and says to bring sequences over as FCP7 XML, AAF or OTIO. FilmCraft does open its own project format, the .fcproj, and that is what PR2XML writes from your .prproj. FilmCraft is open source (github.com/storytold/filmcraft) and in alpha, so its README is the reference for the current state.

The .fcproj is a whole project: every chosen sequence and the sequences they nest, the bin tree and all the media, in one file. It opens in FilmCraft 0.17.0 and later. Every project of our test bench opens in FilmCraft 0.20.1.

The XML route is still there: FilmCraft's FCP 7 XML (xmeml) importer reads bins, clips and sequences, tracks, in and out points, markers, nested sequences, transitions, and the Basic Motion, Opacity, Time Remap, Audio Levels and Audio Pan filters with their keyframes. But it turns titles into black video, and halves the position offset of a still larger than the frame. The .fcproj has neither problem.

Exporting XML from Premiere means one export per sequence, with a working Premiere install. PR2XML reads the .prproj itself, so it works without Premiere or an Adobe subscription, and puts every chosen sequence in one file.

From Premiere to FilmCraft in 4 steps

One FilmCraft project for the whole Premiere project.

  1. Step 1

    Drop the .prproj into PR2XML

    Open the converter and drop your .prproj. Analysis and the timeline preview are free: check that your sequences, tracks and clips are read correctly before paying.

  2. Step 2

    Pick the sequences and the .fcproj output

    Tick the sequences you want in FilmCraft and choose .fcproj (FilmCraft). PR2XML writes one project: each sequence in its bin, every media in its bin, the bin tree nested as in Premiere, nested sequences included. The XML (XMEML) output is still there and follows the same bins.

  3. Step 3

    Open the project in FilmCraft

    In FilmCraft 0.17.0 or later, use File > Open Project… and select the .fcproj. For an .xml, use File > Import… (Cmd+I): FilmCraft then merges the bins, media and sequences into the open project.

  4. Step 4

    Check the media paths

    The project keeps each media path as it was in Premiere. If the files moved, use PR2XML's Replace media paths setting before converting. With an .xml, FilmCraft also lists anything it could not read in its import report.

What arrives in FilmCraft

What the .fcproj project carries. Points that only apply to the XML are marked.

Editable titles
Every title whose text PR2XML reads becomes a FilmCraft text layer, with its words, font, style and size, which you edit in FilmCraft.
Sequences and bins, one file
Every chosen sequence and the sequences they nest, the bin tree and all the media. The XML also puts every sequence in one file, each in its bin, each media as a master clip in its own.
Media and metadata
Path, start timecode, metadata such as Description, Scene, Shot, Take and Tape Name, and markers set on the media.
Sequences and tracks
Frame size, frame rate, drop frame, start timecode, track names, locked, hidden and muted tracks.
The edit
In and out points, constant speed, frame holds, disabled clips, audio and video links, nested sequences.
Motion, opacity and blend modes
Position, scale, rotation and anchor point, opacity, with their keyframes, and the blend mode. A still larger than the frame keeps its position offset.
Audio
Volume with its keyframes, clip gain and pan. In the XML, each audio clip also says which source channel it plays (sourcetrack).
Transitions
Cross dissolve, dip to black or white, Film Dissolve, push, slide and wipe, and audio crossfades.
Markers
Sequence, clip and media markers, their colour mapped to FilmCraft's nearest label.
Solids and multicams
Black Video and Color Matte. A multicam clip becomes a nested sequence on the angle shown.
Crop, ProcAmp, flip, drop shadow
Carried in the .fcproj, and FilmCraft loads them. Their look has not yet been compared frame by frame with the original: check it on your shots. The XML also writes ProcAmp and Horizontal Flip, under their Premiere names.

What does not come over

What you will redo in FilmCraft:

Title styling
In the .fcproj, a title keeps its words, font, style and size, but not its colour, alignment or position inside the title: it arrives as white, centred text. With the XML, FilmCraft's importer does not read text generators: a title comes in as Black Video, or as Transparent Video named after its words with the 'XML for FilmCraft' option.
Speed ramps
In the .fcproj, a ramp is written at its average speed. With the XML, FilmCraft's Time Remap reader handles constant speed, reverse and freeze frames; a ramp's curve may not survive.
Colour and effects
The .fcproj carries no Lumetri or other grade, no Gaussian blur, Corner Pin or film grain. With the XML, Lumetri and most Premiere effects do not travel either; FilmCraft reports every effect it does not know.
Adjustment layers and native multicam
Adjustment layers are not carried. A multicam arrives as a nested sequence on its angle, not as a FilmCraft multicam.
Captions
Caption tracks are written neither into the .fcproj nor into the XML. From a .drp, on the other hand, PR2XML also delivers the subtitles as a .srt, which FilmCraft's File > Import turns into a caption track.

FilmCraft is alpha software. Open a copy of your project first and compare with the original before you continue the edit there.

Comparison

PR2XML or Premiere's own XML export?

If Premiere is still installed, it can export a Final Cut Pro XML, which FilmCraft imports. Here is the difference with the project PR2XML writes.

XML exported from PremierePR2XML .fcproj project
Needs PremiereYes, installed and with an active subscriptionNo, the .prproj is read directly
SequencesOne export per sequenceEvery chosen sequence in one project
BinsOnly the exported sequenceThe bin tree, each media in its bin
TitlesBlack video in FilmCraft's importEditable text layers
From ResolveNot applicableA .drp converts the same way
PriceIncluded in the Premiere subscription75 € once, lifetime license

PR2XML writes the FilmCraft project itself, without reopening Premiere or exporting sequence after sequence. If you would rather have an FCP 7 XML, the same conversion writes one too.

From Resolve, price and very large projects

It works from a DaVinci Resolve .drp too: PR2XML writes one .fcproj or one XML with the chosen timelines and the Media Pool bins, Text+ titles as text layers in the .fcproj, including those typed on several lines, and the subtitle tracks as a .srt for FilmCraft's File > Import.

Analysis and preview are free and unlimited, and the free trial converts the first minute of one timeline once. Downloading full conversions takes a license: 75 €, paid once, for life, with no subscription.

A very large project can go over the online conversion limit. Send it through the contact form and we will convert it for you.

FAQ

Frequently asked questions

Can FilmCraft open Premiere Pro projects?

Not .prproj files: as of November 2026, its README says native .prproj import does not exist yet. FilmCraft does open its own project format, the .fcproj, which PR2XML writes from the .prproj. PR2XML can also write an FCP 7 XML, which FilmCraft imports.

Which file should I give FilmCraft?

The .fcproj, its native project format, opened with File > Open Project: it carries the bins, every chosen sequence and the titles as text. FilmCraft also imports FCP 7 XML (xmeml), FCPXML 1.9 to 1.11, OpenTimelineIO, CMX 3600 EDL and AAF, but its XML import turns titles into black video.

Which FilmCraft version do I need?

FilmCraft 0.17.0 or later (project schema v13). Every project of our test bench opens in FilmCraft 0.20.1.

Do I need Premiere installed?

No. PR2XML reads the .prproj directly, even if your Adobe subscription has expired.

Will my bins come across?

Yes. The .fcproj rebuilds the bin tree, with every sequence and every media in its place. In the XML, each sequence is written in its bin, and each media as a master clip in its own, so FilmCraft files them as they were in Premiere.

What happens to my titles?

Choose the .fcproj output: every title whose text PR2XML reads arrives as a FilmCraft text layer with its words, font, style and size, editable in FilmCraft; the colour, alignment and position inside the title are not carried (white, centred text). With the XML, FilmCraft's importer does not read text generators: a title comes in as Black Video, or, with the XML for FilmCraft option, as Transparent Video named after its words.

FilmCraft vs Premiere Pro: what should I know?

FilmCraft is free and open source (MIT or Apache 2.0), runs on macOS, Windows, Linux and in the browser, and is in alpha: its README lists native .prproj import, plugin hosting (no VST3, Audio Units or OpenFX) and speed on big footage among its gaps. Moving a copy of a project over is the simplest way to see whether it fits your work.

How much does PR2XML cost?

Analysis, preview and the one-minute trial are free. The full download takes the 75 € lifetime license, paid once, with no subscription. See pricing.

My project is too large to convert online

Send it through the contact form: we will convert it for you.

Move your Premiere project into FilmCraft

Drop your .prproj, preview the sequences for free and download one FilmCraft project for the whole project.

Free analysis, preview and a one-minute trial. No subscription.